Mechanical and Environmental Assessment of Lathe Waste as an Addiction to Concrete Compared to the Use of Commercial Fibres

Laburpena

The use of fibres applied to concrete in order to improve its properties is widely known. Nowadays, research is not only focused on improving mechanical properties but also on the environmental implications. The aim of this research was a mechanical and environmental comparison between different types of fibres. For this purpose, commercial fibres of three materials were used: low carbon steel, modified polyolefins, and glass fibre. In order to improve the sustainability of the sector, we also analysed and compared the performance of using a waste product, such as fibres from machining operations on lathes. For the evaluation of the mechanical properties, compression and flexural tests were carried out. The results show that the use of low carbon steel fibres increases the flexural strength by 4.8%. At the environmental level, and in particular for impact categories such as the Global Warming Potential (GWP), lathe waste fibres prove to be the most suitable. For instance, compared to glass fibres, CO2 emissions are reduced by 14.39%. This is equivalent to a total of 38 kg CO2 emissions per m3 of reinforced concrete. In addition to avoiding the consumption of 482 MJ/m3 of fossil fuels, the results of the research indicate the feasibility of using waste fibres as a substitute for commercial fibres, contributing to an improved environmental balance without losing mechanical performance.