Segregación de una mezcla granular binaria producida en un carro alimentador de una máquina compresora monopunzón empleando DEM

  1. Martínez Martínez, L 1
  2. Sainz García, E. 1
  3. Muro Hernández, J. 1
  4. Alba Elías, F. 1
  5. González Marcos, A. 1
  1. 1 Universidad de La Rioja
    info

    Universidad de La Rioja

    Logroño, España

    ROR https://ror.org/0553yr311

Buch:
Comunicaciones presentadas al XVII Congreso Internacional de Dirección e Ingeniería de Proyectos, celebrado en Logroño del 17 al 19 de julio de 2013

Verlag: Asociación Española de Ingeniería de Proyectos (AEIPRO)

ISBN: 978-84-616-6454-2

Datum der Publikation: 2013

Seiten: 1561-1573

Kongress: CIDIP. Congreso Internacional de Ingeniería de Proyectos (17. 2013. Logroño)

Art: Konferenz-Beitrag

DIALNET GOOGLE SCHOLAR lock_openOpen Access editor
Institutionelles Repository: lock_openOpen Access Editor

Zusammenfassung

This work analyzes the segregation phenomena during the die filling of a binary granular mixture in a feed hopper of a tablet compression machine. These phenomena, which are due to the alternative movement of the feed hopper, are investigated using DEM simulations and empirical tests. The optimal values of the model parameters were adjusted by comparison with compression tests performed with a real machine. In order to reduce the computational cost required by using a feed hopper with similar dimensions of a conventional one (fully 3D model), the width of the feed hopper was reduced by 60% (thin sliced model) both in the simulation and the experimental tests.Due the characteristics of the ingredients used in this study, the most relevantparameters of the simulation were the filling method of the feed hopper, its geometry and the value of different friction coefficients. The main result of this study is a model that allows simulating, in a reasonable way, the segregation phenomena that occur in the feed hopper of a tablet compression machine (‘single punch’ eccentric press).

Fuente de los datos: Dialnet