Stability analysis of the gas metal arc welding process based on acoustic emission technique

  1. Roca, A.S. 2
  2. Fals, H.C. 2
  3. Fernández, J.B. 1
  4. Adán, F.S. 1
  5. Macías, E.J. 1
  1. 1 Universidad de La Rioja
    info

    Universidad de La Rioja

    Logroño, España

    ROR https://ror.org/0553yr311

  2. 2 Universidad de Oriente - Santiago de Cuba
    info

    Universidad de Oriente - Santiago de Cuba

    Santiago de Cuba, Cuba

    ROR https://ror.org/03kqap970

Revista:
Welding International

ISSN: 0950-7116

Any de publicació: 2009

Volum: 23

Número: 3

Pàgines: 173-180

Tipus: Article

beta Ver similares en nube de resultados
DOI: 10.1080/09507110802543385 SCOPUS: 2-s2.0-67650630276 GOOGLE SCHOLAR

Altres publicacions en: Welding International

Objectius de Desenvolupament Sostenible

Projectes relacionats

Utilización de técnicas de inteligencia artificial y emisión acústica para la optimización del proceso automatizado de soldadura y análisis de estabilidad

2007/00080/001

Resum

A new criterion for stability analysis of the gas metal arc welding (GMAW) process is proposed and presented in this work, based on acoustic emission generated by the arc during short-circuiting metal transfer. For the experimental development an AWS ER70S-6 wire with a diameter of 0.8 mm and a DEP 401 rectifier were used. The weld bead was carried out on a 4-mm-thick AISI 1020 steel plate. Several welding conditions were studied with variation of the process parameters during the deposition of the beads. The acoustic emission signals were acquired using a measurement system composed of a MV-201 microphone, with a sensitivity of 10 ± 3 mV Pa -1 and frequency bandwidth of 20 Hz to 170 dB to 100 kHz, and a data acquisition card coupled to a PC. A stability index was proposed. Eventually, a statistical analysis for validation of the obtained experimental results was carried out. The outputs allowed obtained a relationship between the acoustic signals and the arc voltage signals. The feasibility of the proposed index, and the effectiveness of the method as a novel means of analysing the stability of arc welding, was demonstrated based on acoustic emission for analyses of GMAW process stability.